English GB
The Bostik brand is a reference in the world of adhesives and binders. We have selected the MSP 108 for all your bonding needs with Burgundy stone elements.
The surfaces must be sound, clean, dust-free, degreased, and non-fragile. Apply in beads or spaced dots about 15 cm apart, press, and allow to cure. Also ideal for vertical bonding (cladding, wall coverings...).
Very high final resistance in terms of supported weight, and durability against weather and UV rays.
Capacity: 290 ml
Our anti-moss treatment for natural stone is a powerful and effective cleaner, specially designed for the outdoor cleaning of your stone surfaces.
This fungicide works quickly to dissolve and remove moss, algae, and lichen, restoring your floors, walls, and other natural stone installations to a clean and well-maintained appearance.
Non-abrasive and formulated to preserve the integrity of the stone, it provides a deep clean without damage.
Coverage: 1 liter treats approximately 10 m². For long-lasting protection, follow up with our Imperpierre water repellent or mineralizing treatment.
Le Comptoir des Pierres has selected for you the product PROLIJOINT FIN Beige 541 from the manufacturer Parexlanko, leader brand in the universe of building materials.
This product is ideal to achieve with confidence your laying of Burgundy limestone with a perfectly adapted grout of beige colour.
We recommend this joint for your paving, especially in light golden to golden yellow tones, such as Lanvignes Golden-Yellow, Saint-Genay, Massangis, or cobblestones.
For lighter stones, we suggest using Mapei Ultracolor in Jasmine color instead.
Key points :
-Joints from 2 to 12 mm
-Water/oil repellent protection
-Indoor and outdoor
-Suitable with low temperature heating floor
The second photo shows the detail of the consumption according to the dimensions of the tiles and the width of the joint (Parexlanko source).
Technical data sheet available on request with implementation recommendations.
This product is ideal to confidently realize your bon coat in order to lay your stones from Burgundy.
Key points :
-For all types of surface
– Strengthens the cohesion of the surface
– Facilitate the adhesion of the glue
– Compatible with anhydrite floor
Technical data sheet available on request
1 litre for roughly 10 sqm
Le Comptoir des Pierres has selected for you the product PROLIPRO Blanc 522 from the manufacturer Parexlanko, leader brand in the universe of building materials.
This product is ideal to realize with confidence your adhesive laying of Burgundy stone.
Key points :
-Packaging 25 kg
-Yield 4-5 sqm
-White glue
Technical data sheet available on request.
Discover our Proliterasse adhesive by Parexlanko, specially designed for outdoor use.
In the rare event of joint migration on natural stone, we recommend applying this product from the Starwax brand to the affected areas. Allow it to penetrate, then clean with clear water. Repeat the process as many times as needed.
Protect your floor afterward with a mineralizer or water repellent.
Le Comptoir des Pierres has selected the ULTRACOLOR PLUS Jasmine product from the manufacturer MAPEI, a leading brand in the building industry.
This product is ideal for confidently installing your Burgundy stone with a jasmine/off-white joint color that is perfectly suited. We recommend this joint for your flooring in Charmot Light limeston, Semond Light with veins or Semond Blended, as well as for our cabochon flooring.
For golden-yellow stones (Lanvignes, Saint-Genay, Paving), we recommend the PROLIJOINT SOL Beige 541 reference from the manufacturer Parexlanko.
Key features :
Technical data sheet available upon request with application recommendations.
Our finishing sponge has a finer grain than the standard joint sponge, providing a better finish, especially for thin joints in bathrooms, wall coverings, or generally for soft or brushed finishes (straight edges).
The two sponges are complementary; one is for "roughing out" and the other for finishing.
This product is the perfect one to achieve with confidence your adhesive laying of Burgundy limestone on hydraulic or electric under-floor heating.
Key points :
-Packaging 15 kg (same performance as a 25kg bag)
-Yield 4-5 sqm
-Reprofiling of floors and walls between 4 and 10 mm
-Suitable for under-floor heating
Technical data sheet available on request.
Discover our Prolipro adhesive by Parexlanko, also suitable for indoor use if you do not have underfloor heating.
This funeral maintenance kit is specially designed to preserve the shine and beauty of your limestone, granite, and marble memorials.
It includes specially formulated products to clean, protect, and maintain surfaces while respecting the material.
Easy to use, it effectively removes dirt, moss, and other impurities while preserving the natural patina and texture of the limestone.
Our kit includes :
IMPERPIERRE 1L : Hydro/Oleophobic solvent-based treatment.
DETERMOUSSE 1L : Fungicide suitable for natural stones.
Installation of slabs and paving in stone. Professional tiler's comb. Trowel for glue. Tile comb. Glue trowel.
We recommend the appropriate tools for the installation and jointing of our Burgundy stone elements (slabs and paving). Discover our half-moon comb for single or double gluing (especially outdoors) of our natural stone slabs.
Dimensions : 28 x 11 cm. Half-moon radius R = 10 mm.
Eliminates the veil of cement or lime after laying the natural stone. Cleaning.
Organic acid-based detergent for the removal of the surface layer of cement and lime on natural stone.
1 liter diluted to 50% treats between 10 and 15 m2.
Can be used diluted to a maximum of 10% on honed finish.
Le Comptoir des Pierres has selected for you the product Webercal-F 016 from the manufacturer Weber, a reference brand in the building industry.
This product is ideal for confidently carrying out your installation of natural or split-faced Burgundy limestone with a perfectly adapted beige joint color. The estimated yield is 5 to 7 m² for joints with a width of 1.5 cm. This ready-to-use joint is also used to grout stones for walls, rubble, or strips during wall construction. Due to its granularity, it is more suitable than the Parexlanko Prolijoint grout, which is recommended for slabs and pavers. Bag of 25 kg.
Also ideal for renovation after scraping the existing joints.
We offer classic installation tools for our natural stone pavings and tiles: glue comb, trowel, sponges...
This grouting sponge has two sides: one red for "smoothing" / "scraping" the excess joint that has already slightly dried, and the other more traditional side for cleaning the unset joint. Note: cleaning the joints with a sponge should always be done diagonally to avoid emptying the joint.
Rubber sole. Installation tools for paving and natural stone slabs.
We offer the most suitable tools for the installation of natural stone, particularly Burgundy stone: notched trowel, joint trowel, specific sponges... The right tools will enable a smooth and hassle-free installation.
Feel free to contact us for any questions about your natural stone project.
Fixing and jointing for limestone. Ideal for installing our kitchen and bath elements.
Our kit contains:
For Charmot Light stone, we recommend the color Jasmin C08; for Charmot Golden, Lanvignes Golden-Yellow, Comblanchien Light, and Corton, the Beige de Grès C1110; for Lanvignes Antique with patina, the Bahama Beige C10; for Bleu de Lignières, the Gris Perle C80; and for Belgian Blue Stone, the Anthracite C67.
Our Kit contains :
HYDROPIERRE 500 ml:
Water/oil repellent protection in aqueous phase
DETERCLEAN 500 ml :
PH-neutral detergent/degreasing agent
-Application buffers
-Spray head
-Protective gloves
Le Comptoir des Pierres has selected for you the ULTRACOLOR PLUS Medium Grey product from the manufacturer MAPEI, a reference brand in the construction industry.
This product is ideal for confidently laying your natural stone with a perfectly suited medium grey joint color. We recommend this joint for your pavings and wall coverings in Bleu de Lignières (stone from the Tonnerrois basin) or in Belgian Blue Stone (smooth or aged finish). This joint can also be used for our cabochon pavings.
For golden-yellow stones (Lanvignes, Saint-Genay, pavés), we recommend the PROLIJOINT SOL Beige 541 reference from the manufacturer Parexlanko, and for lighter stones (Charmot, Semond…), choose the Mapei Ultracolor Plus Jasmin color product.
Key Features:
Technical data sheet available upon request with application recommendations.
The product to effectively protect from grease and color stains indoors and outdoors.
Does not alter the appearance or color of natural stones. Very effective on porous materials.
To be renewed if necessary after a few years and depending on the intensity of cleaning and traffic.
Consumption :
1 liter treats about 10-14 sqm. 2 applications recommended: first application before grouting / second application after jointing
Also, discover our water repellent for natural stone indoors.
The kit includes:
– 1 Adhesive Trowel – Half-Moon R = 10 mm
– 1 Jointing Trowel – Rubber Base
– 1 Joint Sponge – 2 Sides for Grouting and Cleaning
– 1 Finishing Sponge
Also, discover our installation products: adhesives, joints, water-repellent... Feel free to contact us for your natural stone projects.
Our fixing kit is designed for the easy and secure installation of your engraved natural stone plaque with four pre-drilled holes.
Ensure your plaque is safely and elegantly mounted with this purpose-built fixing kit.
Contents:
Medium Kit (for plaques up to 60 x 40 cm):
Large Kit (for plaques larger than 60 x 40 cm):
Available Finishes : Chrome or Brass
The DITRA uncoupling membrane by Schlüter Systems, made of polyethylene, is ideal for installing stone paving on existing surfaces such as tiles or parquet.
Thanks to its decoupling technology, it prevents cracks caused by floor movements, ensuring a durable and stable installation. Easy to install, it provides optimal protection for your coverings while preserving the integrity of your floors.
Available in 30 x 1 m rolls (30 m²) or cut to size per m².
Easy to install, it effectively protects against moisture and prevents water infiltration, extending the longevity of your installations. A reliable solution for dry, moisture-free shower and bathroom spaces.
Available for sale by the square meter.
Selected by ourselves in order to enhance your natural stones from Burgundy, you will find below fixing products (adhesive, grout, bond coating..), a maintenance kit for kitchen and bathroom, water/oil repellent treatments, detergents for multiple applications for the protection and detergents.
White adhesive : White adhesive is recommended (instead of grey adhesive) for natural stone to prevent potential efflorescence.
Protection : We strongly recommend protecting the stone after installation to facilitate maintenance and prevent possible stains.
Grout : Grouts can be made traditionally or purchased as ready-to-use versions. The color of the joint is primarily a matter of taste. On this page, you will find beige, jasmine, and medium grey jointing mortars recommended according to the type of stone.
We also offer Otto Seal silicone joints for kitchen countertops, shower trays, and sinks.
Maintenance : Our stones are limestone, so all descaling agents (petrochemical products, white vinegar, etc.) should be avoided. Instead, use pH-neutral products.
Mat and bond coating : When installing on an existing surface (tiles, parquet, etc.), use a bonding primer (or adhesion primer) and a decoupling membrane. A waterproofing membrane should be applied under shower trays and wall coverings in bathrooms.
Learn more through our articles on natural stone installation, treatment, and maintenance.
Français
